Supertooth Melody Betriebsanweisung PDF herunterladen

Pairing code

0 0 0 0

The SuperTooth® Melody is a Bluetooth® A2DP stereo headset.

You can listen to music from a compatible phone, tablet,

computer, laptop or music player. You can also make and

answer calls hands-free with your compatible mobile phone.

You can use the headset with compatible devices that support

Bluetooth® A2DP wireless technology.

To use the headset, place it over your head with the pad

indicated with L on the left ear and the pad with R on the right

ear.

Adjust the headband length so that the speaker pads rest

comfortably.

Federal Communications Commission (FCC) Statement

15.21

You are cautioned that changes or modications not expressly approved by the part responsible

for compliance could void the user’s authority to operate the equipment.

15.105(b)

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the

equipment

o and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions:

1) This device may not cause interference and

2) This device must accept any interference, including interference that may cause undesired

operation of the device.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. End users must follow the specic operating instructions for satisfying RF exposure

compliance. This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

For the whole declaration please visit : http://www.supertooth.net/download

Euro Communication Equipements SAS

Route de Foix D117

11500 NEBIAS (FRANCE)

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection

systems). This marking shown on the product or its literature, indicates that it should not

be disposed with other household wastes at the end of its working life. To prevent

possible harm to the environment or human health from uncontrolled waste disposal,

please separate this from other types of wastes and recycle it responsibly to promote the

sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local

government oce, for details of where and how they can take this item for environmentally safe

recycling.

Business users should contact their supplier and check the terms and conditions of the purchase

contract. This product should not be mixed with other commercial wastes for disposal. This

product has an embedded, non-replaceable battery, do not attempt

open the product or

remove the battery as this may cause injury and damage the product. Please contact the local

recycling facility for removal of the battery. The embedded, non-replaceable battery is designed

to last the life time of the product.

Hereby, EURO COMMUNICATION EQUIPEMENTS, represented by Xavier Marchant, CEO,

declares that the SuperTooth® Melody, MODEL BT-300, is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC of the European Parliament and

of the Council of 9 March 1999 on radio equipment and telecommunications terminal

equipment and the mutual recognition of their conformity.

Reconnect the headset

To connect the headset to the device that you have last used with it, switch on

the headset and it will reconnect automatically. If it doesn’t, enable connection

in the Bluetooth menu of your device.

Adjust the volume

To adjust the headset volume, press the volume up (5) or down (4) button

during a call or while listening to music. To adjust the volume quickly, press and

hold either button.

Warning:

Excessive sound pressure from earphones and headphones can cause hearing

loss.

Calls

To make a call, dial the phone number on your phone keypad.

To redial the number you last called (if your phone supports this feature with the

headset), when no call is in progress, short press the multifunction (7) button.

To activate voice dialling (if your phone supports this feature with the headset),

when no call is in progress, press the multifunction (7) button twice quickly until

the phone starts voice dialling, and process as described in the phone user

guide.

To answer or end a call, short press the multifunction (7) button or use the

phone buttons.

To reject a call, press and hold the multifunction (7) button for about 2 seconds.

To mute or unmute the microphone during a call, press the play / pause (8)

button.

To switch a call from the headset to the connected phone, press and hold the

multifunction (7) button for about 2 seconds.

To switch the call from the phone to the headset, press and hold the

multifunction (7) button for about 2 seconds.

Listen to music

To listen to music, connect the headset to compatible music player that

supports the A2DP Bluetooth prole.

The available music functions depend on your music player.

If you receive or make a call while listening to music, the music is paused until

you end the call.

To play a track, select it in the music player, and press the play / pause (8)

button.

To pause or resume playing, press the play / pause (8) button.

To stop playing, press the play / pause (8) button twice quickly.

To select the next track during playing, press the forward (9) button once.

To select the previous track, press the rewind (6) button once.

To scroll through the current track quickly, press and hold either button.

Clear settings or reset

To clear the pairing settings from the headset, switch o the headset, and press

and hold the multifunction (7) button and the volume down (4) button (for

over 8 seconds) until the Bluetooth indicator ashes red, green and blue three

times.

To hardware reset the headset, connect the headset to a charger or plug it on a

computer, and press both the multifunction (7) button and the volume up (5)

button.

Charge the battery

When the battery is discharged, the headset beeps about every minute, and

the Bluetooth indicator (10) ashes red.

To charge the headset:

1. Connect the USB cable to your computer or to a USB charger.

2. Connect the USB cable to the charger connector (2).

The charge indicator (1) ashes steady red while charging.

3. When the battery is fully charged, the charge indicator (1) ashes

steady green. Disconnect the cable from the headset.

The fully charged battery has power for up to 7 hours and 30 minutes of talk

time, up to 90 hours of standby time, or up to 7 hours and 30 minutes of

music playing time.

Warning:

1. Attention should be drawn to the environment aspects of battery

disposal.

. Batteries (battery pack or batteries installed) shall not be exposed to

excessive heat such as sunshine or re.

Switch on

To switch on, press and hold the multifunction (7) button about 4 seconds.

The headset beeps, and the Bluetooth indicator (10) ashes green.

When the headset tries to connect to the last used phone or music player,

the Bluetooth indicator (10) blinks green slowly. When the headset is

connected to a device and is ready to use, the Bluetooth indicator (10) blinks

blue slowly. If the headset has not been paired with a device, it automatically

enters in pairing mode.

Switch o

To switch o, press and hold the multifunction (7) button for about 4

seconds. The headset beeps, and the Bluetooth indicator (10) ashes red.

If the headset is not connected to a device within 10 minutes, it switches o

automatically.

Pairing

1. Please make sure that your phone or music player is switched on.

2. To pair the headset if it has not been previously paired with a device,

switch on the headset. The headset enters in pairing mode, and the

Bluetooth indicator (10) blinks blue quickly.

To pair the headset if it has been previously paired with another device,

make sure that the headset is switched o, and press and hold the

multifunction (7) button (for about 6 seconds) until the Bluetooth

indicator (10) blinks blue quickly.

3. Activate the Bluetooth feature on your phone or music player, and set

it to search for Bluetooth devices.

4. Select "STMELODY" from the list of found devices on your phone or

music player.

5. If necessary, enter the passcode 0000 to pair and connect the headset

to your device.

6. The Bluetooth indicator (10) blinks blue slowly. The headset is ready to

use.

Disconnect the headset

To disconnect the headset from your device, switch o the headset, or

disconnect it in the Bluetooth menu of your device.

0700

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such

marks by Euro-CB is under license. Other trademarks and trade names are those of their respective owners.

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Pairing code

Pairing codePairing code0 0 0 00 0 0 0The SuperTooth® Melody is a Bluetooth® A2DP stereo headset.You can listen to music from a compatible pho

Seite 2 - Compact size - Adjustable

(10) Bluetooth indicator:• Green ash: power on.• Red ash: power oﬀ.• Blinking blue slowly: connected / paired / on.• Blinking blue quickly: in pairi

Seite 3 - Code pairage

Code pairageCode pairage0 0 0 00 0 0 0Le SuperTooth® Melody est un casque stéréo Bluetooth® A2DP.Il permet d’écouter de la musique à partir d’un télép

Seite 4

(10) Voyant Bluetooth :• Flash vert : allumage.• Flash rouge : arrêt.• Clignote bleu lentement : connecté / pairé / allumé.• Clignote bleu rapide : en

Kommentare zu diesen Handbüchern

Keine Kommentare

Supertooth Melody Betriebsanweisung

Stöbern Sie online oder laden Sie Betriebsanweisung nach Mobile Headsets Supertooth Melody herunter. Supertooth Melody Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern